For Models: Defender Max
Tip out Windshield Enclosure, Made from 3/32 aluminum with stylish re-enforcing bends that makes it extremely rigid. Corners and transitions are welded so there are no exposed seams. The entire enclosure only weighs approximately 85 lbs depending on the model and added components unlike steel that weighs twice as much. Exposed edges have vinyl edge protectors. All parts are powder coated with a flat black finish that matches roll cage. The Tip-out windshield Includes DOT certified safety glass which locks down water and air tight when closed. It can be tipped out in two positions of 2" or 4" to allow for air flow. The glass frame can also be removed easily and quickly when you don't want a windshield by removing the 2 hinge bolts and unlatching the latches. The strong, light weight aluminum frame mounts securely to the roll cage in minutes with roll bar clamps and seals tightly to the hood and roll cage so you have no rattles and leaks along the hood. The top and back bolt together tightly and also mount easily to the roll cage with roll cage clamps. The back window is also laminated safety glass. In the unfortunate event the glass is chipped or broken most auto glass shops can replace the glass.


$2,070.00
$260 Shipping (Lower 48)

Engine Size:

Year:

Qty

Add to Cart

Fixed Glass Windshield Enclosure Is no longer available



$0.00
$0 Shipping (Lower 48)

Engine Size:

Year:

Qty

Add to Cart

Full suicide doors with snap up plastic or fixed laminated safety glass windows. Doors can be removed easily by lifting the door off of the roll pin hinges. Made from 3/32 thick aluminum with ¾ bulb seal around the outer edge of the door. Snap on plastic windows have the snaps located every 4” and a nylon strap sewn around the parameter where snaps mount to window for additional strength. Latch is a simple roll cage latch that pulls the door edge in to give the doors a good seal.


$2,540.00
$220 Shipping (Lower 48)

Engine Size:

Year:

Qty

Add to Cart

Full suicide doors with removable pop out laminated safety glass windows. The windows pop out at the back 2 or 4 inched and lock down water and air tight. Window can be removed easily by lifting off of the roll pin hinges. Doors can be removed easily by lifting the door off of the roll pin hinges. Made from 3/32 thick aluminum with ¾ bulb seal around the outer edge of the door. Latch is a simple roll cage latch that pulls the door edge in to give the doors a good seal.


$3,150.00
$220 Shipping (Lower 48)

Engine Size:

Year:

Qty

Add to Cart

Tip out Windshield Includes DOT certified safety glass which locks down water and air tight when closed or can be tipped out in two positions of 2" or 4" to allow for air flow. The glass frame can also be removed easily and quickly when you don't want a windshield by removing the 2 hinge bolts and unlatching the latches. The strong, light weight aluminum frame mounts securely to the roll cage in minutes with roll bar clamps and seals tightly to the hood and roll cage so you have no rattles and leaks along the hood. Made from 3/32 aluminum with stylish re-enforcing bends that makes it extremely rigid. Corners and transitions are welded so there are no exposed seams. Exposed edges have vinyl edge protectors. All parts are powder coated with a flat black finish that matches roll cage.



$870.00
$210 Shipping (Lower 48)

Engine Size:

Year:

Qty

Add to Cart

Fixed Glass windshield is no longer available



$0.00
$0 Shipping (Lower 48)

Engine Size:

Year:

Qty

Add to Cart

The Top is made from 3/32 aluminum with stylish re-enforcing bends that makes it extremely rigid. The 2 tops bolt together with neoprene tape between the seam to make a weather proof seal. Corners and transitions are welded so there are no exposed seams. The entire top only weighs 25 lbs keeping the weight down unlike steel that weigh twice as much. Exposed edges have vinyl edge protectors. All parts are powder coated with a flat black finish that matches roll cage. Mounts easily to roll cage with provided roll bar clamps.



$790.00
$220 Shipping (Lower 48)

Engine Size:

Year:

Qty

Add to Cart

Back Made from 3/32 aluminum with stylish re-enforcing bends that makes it extremely rigid. Corners and transitions are welded so there are no exposed seams. Exposed edges have vinyl edge protectors. All parts are powder coated with a flat black finish that matches roll cage. The fixed laminated DOT certified safety glass window won’t scratch like plexi- glass and provides a clear view. Mounts easily to roll cage with provided roll bar clamps. Back panel can only be mounted to Alumilite Armor top and can not be mounted or used with other tops. (Slider Window in picture available upon special request and additional cost)



$460.00
$210 Shipping (Lower 48)

Engine Size:

Year:

Qty

Add to Cart

Made to fit Alumilite Armor top only. 3" high aluminum roof rack with radiused front and back. Has slots around the bottom to allow for drainage and a lip around the top so straps, nets or bungees can be hooked



$490.00

Qty

Add to Cart

Waterproof, self-parking wiper motor with 14" silver polymer blade and 10"-14" Deluxe adjustable stainless steel arm. Fully sealed waterproof housing made of UV stabilized, high-temp, impact resistant thermoplastic. Motor Size: 6-5/8" L x 3-3/8" W x 2" H and 2 1/2 long x 5/8 diameter shaft. Factory sweep is preset but adjustable to 50 degree, 65 degree, 80 degree, or 110 degrees. 12v RF shielded circuitry.



$220.00

Qty

Add to Cart

Manual stainless steel wiper



$85.00

Qty

Add to Cart

10" X 12" roof vents that open 2" or 4" and locks down air and water tight. Can be removed easily when not wanted,



$125.00

Qty

Add to Cart

Full tip out kit allows windshield to tip up close to 90 degrees from closed position. includes 2 gas extensin shocks and mounting brackets. Not recommended to ride in full tip out position on rough roads or high speeds.



$135.00

Qty

Add to Cart

RZR

RZR, RANGER

Yamaha

RHINO, VIKING

Kawasaki

TERYX, TERYX4

Can-Am

COMMANDER

Honda

PIONEER